WHAT'S NEW FROM ENABLING TECHNOLOGIES. . . . . . . . . . . Page 3 ROMEO ATTACHÉ & ATTACHÉ PRO . . . . . . . . . . . . . Page 3 GEMINI PRINT & BRAILLE EMBOSSER . . . . . . . . . . . Page 3 HOME, SCHOOL AND OFFICE EMBOSSERS: SINGLE-SIDED. . . . . . Page 4 ROMEO 25. . . . . . . . . . . . . . . . . . . . . . . Page 4 ROMEO PRO 50. . . . . . . . . . . . . . . . . . . . . Page 5 THOMAS. . . . . . . . . . . . . . . . . . . . . . . . Page 8 HOME, SCHOOL AND OFFICE EMBOSSERS: DOUBLE-SIDED. . . . . .Page 10 JULIET CLASSIC. . . . . . . . . . . . . . . . . . . .Page 10 JULIET PRO. . . . . . . . . . . . . . . . . . . . . .Page 12 ET. . . . . . . . . . . . . . . . . . . . . . . . . .Page 14 JULIET PRO 60 . . . . . . . . . . . . . . . . . . . .Page 16 PRINT AND BRAILLE TOGETHER . . . . . . . . . . . . . . . .Page 18 TRANSEND LT . . . . . . . . . . . . . . . . . . . . .Page 18 COMMERCIAL BRAILLE PRODUCTION. . . . . . . . . . . . . . .Page 21 BOOKMAKER, BRAILLE EXPRESS 100 and BRAILLE EXPRESS 150 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 21 PLATE EMBOSSING DEVICE MODEL PED-30 . . . . . . . . .Page 23 MARATHON. . . . . . . . . . . . . . . . . . . . . . .Page 25 BRAILLEPLACE. . . . . . . . . . . . . . . . . . . . .Page 26 LABELERS & SIGNMAKERS. . . . . . . . . . . . . . . . . . .Page 27 KGS BRAILLE LABELER . . . . . . . . . . . . . . . . .Page 27 PRESTOBRAILLE . . . . . . . . . . . . . . . . . . . .Page 28 BRAILLE TRANSLATION SOFTWARE . . . . . . . . . . . . . . .Page 29 DBT FROM DUXBURY SYSTEMS. . . . . . . . . . . . . . .Page 29 BRAILLE GRAPHICS/TACTILE GRAPHICS from REPRO-TRONICS . . .Page 29 TACTILE GRAPHICS DESIGNER SOFTWARE. . . . . . . . . .Page 29 FLEXI-PAPER . . . . . . . . . . . . . . . . . . . . .Page 30 TACTILE IMAGE ENHANCER. . . . . . . . . . . . . . . .Page 30 TIE JUNIOR. . . . . . . . . . . . . . . . . . . . . .Page 31 THERMO-PEN I & II . . . . . . . . . . . . . . . . . .Page 31 OTHER PRODUCTS FOR MORE BRAILLE POWER. . . . . . . . . . .Page 31 HANDSTAND . . . . . . . . . . . . . . . . . . . . . .Page 31 BRAILLE PAPER . . . . . . . . . . . . . . . . . . . .Page 32 SOUND ENCLOSURES. . . . . . . . . . . . . . . . . . .Page 33 PRICES AND ORDERING INFORMATION. . . . . . . . . . . . . .Page 33 FOR USA CUSTOMERS . . . . . . . . . . . . . . . . . .Page 37 FOR INTERNATIONAL CUSTOMERS . . . . . . . . . . . . .Page 37 WHAT'S NEW FROM ENABLING TECHNOLOGIES ROMEO ATTACHÉ & ATTACHÉ PRO New Romeo Attaché and Attaché Pro make legendary Romeo Braille quality more transportable than ever. Romeo Attaché and Attaché Pro weigh under 17 pounds, use 8.5-inch wide tractor paper, Braille at 15 characters per second, and include three ports (including a USB port) for easy connectivity. Romeo Attaché and Attaché Pro are perfect for on-the-go teachers and students. Or add your favorite notetaker and create a practical, space-saving home office with Braille capability. Romeo Attaché Pro comes equipped with our single-sheet tractors and speaks keypad commands and status message for easier use. For either model, our optional carrying case with extra pockets and a shoulder strap adds even more ease and convenience. Price: Romeo Attaché: $1,895. Romeo Attaché Pro: $1,995. Optional Carrying Case: $94.95. GEMINI PRINT & BRAILLE EMBOSSER The Gemini Print and Braille Embosser from Nippon Telesoft produces print with Braille in one simultaneous pass, fulfilling a long-time dream of Braille producers everywhere. But that's not all that's different about Gemini. You can't help but notice what's missing--embossing noise! Gemini is so extraordinarily quiet you won't need to exile it to a closet or a sound-muffling cabinet. Gemini uses traditional Braille tractor paper, and you can choose regular or large print with Braille or Braille alone. With your Duxbury Braille Translator (DBT) software (sold separately), high-quality documents for all your readers are easier than ever to produce. Price: $13,500, plus $150 shipping. HOME, SCHOOL AND OFFICE EMBOSSERS: SINGLE-SIDED ROMEO 25 * Tough, transportable, single-sided value * 40 character (standard Braille) line * 25 characters per second Our Romeo 25, now at its best price ever, is a rugged basic embosser with a singular reputation for outstanding Braille quality and durability. Ideal for student, personal or home office use, Romeo 25 also has many of the popular features of our larger embossers. Standard features on Romeo 25 include regular Braille graphics, high-resolution Braille graphics, and Dynamic Braille Scaling, which enables you to choose different Braille sizes. Select increased line spacing, California sign Braille, Jumbo Braille, or the smaller Braille often preferred by our Japanese customers. You can even mix Braille sizes within a document. Romeo 25's two graphics modes let you make Braille graphics at normal intensity for large shapes or at high resolution for better detail. Romeo 25 comes ready to work with your IBM-compatible PC's parallel port and has a 9-pin serial port as well. Sixteen menus allow you to customize your embosser for every task you need. Adjust for 6 or 8-dot Braille, even print sideways. Adjust your Romeo 25 to make multiple strikes per character for extra-emphasized dots or to allow for heavier materials. Use a variety of paper sizes. Reprint up to 99 copies of one document automatically with Multi-Copy. ROMEO 25 TECHNICAL SPECIFICATIONS Printing Speed: 25 characters per second. Line Width: 40 characters with Library of Congress spacing. Paper: Continuous tractor feed paper. Width: Adjustable. 1.5 to 13.25 inches (3.8 to 33.6 cm). Paper Length: Selectable. 3 to 14 inches (7.6 to 35.6 cm). Paper Weight: Variable. Physical Description Width: 21.25 inches (53.9 cm). Depth: 13.25 inches (33.6 cm). Height: 8.25 inches (20.9 cm); 6.00 inches (15.2 cm) without lid. Weight: 32 pounds (14.5 kg). Sound Level: 72 DBA. Sound level may vary with ambient conditions. Case Style: Attaché, with handle. Environmental Temperatures: Operating: 35 F to 120 F (2 C to 49 C). Storage: Minus 55 F to 175 F (-48 C to 80 C). Humidity: Operating or Storage: 10% to 95% noncondensing. Shock: 3 foot drop (approximately 5G). Electrical Line Voltage: User Switchable, 105-130 VAC or 210-260 VAC. Amperage: 1.00 Amperes (105-130 VAC), 0.50 Amperes (210-260 VAC). Wattage: (Approximate) 200 (14.5 in low power mode). Interface: (Port 1) Centronics Compatible Parallel. (Port 2) Asynchronous Serial EIA RS-232D, DTE. After three minutes of inactivity, Romeo 25 automatically enters a special low power consumption mode to save energy. As an ENERGY STAR(r) partner, Enabling Technologies has determined that this product meets the ENERGY STAR(r) guidelines for energy efficiency. ROMEO PRO 50 * 50 characters per second! * Tough, transportable, single-sided and feature-rich * 40 character (standard Braille) line More of two good things--features and speed! Our new Romeo Pro 50 is a rugged single-sided embosser built on Romeo 25's heritage of outstanding Braille quality and durability. Romeo Pro 50 even looks just like Romeo 25, but there's more than ever inside the transportable, convenient case. At 50 characters per second, it's twice the speed of Romeo 25 and comes already loaded with all the standard features of our larger embossers. Perfect for schools, small offices, and personal use, Romeo Pro 50 is our best single-sided value ever. Romeo Pro 50's standard features include ET Speaks, our fast and flexible speech system, and our Single Sheet Tractors. ET Speaks comes up talking automatically without ever slowing you down. Even while echoing the commands you enter on Romeo Pro 50's keypad, ET Speaks can still keep working as the voice of your DoubleTalk LT-compatible screen reader and play WAV and other audio files in DOS and Windows. Single Sheet Tractors let you hand-feed non-tractor paper, like letterhead or other special media, one sheet at a time. Other standard features on Romeo Pro 50 include those you'd find on the Romeo 25: Dynamic Braille Scaling, as well as graphics in two intensities, normal and high resolution. Dynamic Braille Scaling lets you change Braille sizes, even within a document, from Library of Congress Braille to California sign Braille, Jumbo Braille, standard Braille with increased line spacing or the smaller Braille often preferred by our Japanese customers. Braille graphics are in demand, whether for maps, mathematics, or just for fun. With Romeo Pro 50's two graphics modes, you can make Braille graphics at normal intensity for large shapes or at high resolution for better detail. Romeo Pro 50 comes ready to work with your IBM-compatible PC's parallel port and has a 9-pin serial port, plus an additional serial port for connecting ET Speaks to your computer whenever you need it to read your screen or play audio files. Sixteen menus allow you to customize your embosser for every task you need. Adjust for 6 or 8-dot Braille, even print sideways. Adjust your Romeo Pro 50 to make multiple strikes per character for extra-emphasized dots or to allow for heavier materials. Use a variety of paper sizes. Reprint up to 99 copies of one document automatically with Multi-Copy. Romeo Pro 50 Technical Specifications Printing: Speed: 50 characters per second. Line Width: 40 characters with Library of Congress spacing. Paper: Continuous tractor feed paper or single sheets, hand-fed one at a time. Width: Adjustable. 1.5 to 13.25 inches (3.8 to 33.6 cm). Paper Length: Selectable. 3 to 14 inches (7.6 to 35.6 cm). Paper Weight: Variable. Physical Description: Width: 21.25 inches (53.9 cm). Depth: 13.25 inches (33.6 cm). Height: 8.25 inches (20.9 cm); 6.00 inches (15.2 cm) without lid. Weight: 32 pounds (14.5 kg). Sound Level: 75 DBA. Sound level may vary with ambient conditions. Case Style: Attaché, with handle. Environmental: Temperatures: Operating: 35 F to 120 F (2 C to 49 C). Storage: Minus 55 F to 175 F (-48 C to 80 C). Humidity: Operating or Storage: 10% to 95% noncondensing. Shock: 3 foot drop (approximately 5G). Electrical: Line Voltage: User Switchable, 105-130 VAC or 210-260 VAC. Amperage: 1.00 Amperes (105-130 VAC), 0.50 Amperes (210-260 VAC). Wattage: (Approximate) 200 (14.5 in low power mode). Interface: (Port 1) Centronics Compatible Parallel. (Port 2) Asynchronous Serial EIA RS-232D, DTE. (Port 3) ET Speaks, Serial. After three minutes of inactivity, Romeo Pro 50 automatically enters a special low power consumption mode to save energy. As an Energy Star® partner, Enabling Technologies has determined that this product meets the Energy Star® guidelines for energy efficiency. THOMAS * Faster, single-sided Braille and a noise-muffling desktop case * 40 character (standard Braille) line * 40 characters per second Originally named in honor of William A. Thomas, board chairman of Enabling Technologies, "Tommy" has made a name for itself for outstanding Braille quality, durability and value. Perfect for a home office, school, or agency, Thomas includes many popular features as standard equipment. These include Dynamic Braille Scaling, as well as graphics in two intensities, normal and high resolution. Dynamic Braille Scaling allows you to change from Library of Congress Braille to California sign Braille, Jumbo Braille, standard Braille with increased line spacing or the smaller Braille often preferred by our Japanese customers with just one command. You can even mix Braille sizes within a single document. With Thomas' two Braille graphics modes, you can make graphics for maps, mathematics, or just for fun at either normal intensity or at higher resolution for better detail. Thomas comes ready to work with your IBM-compatible PC's parallel port, and has a 9-pin serial port as well. Sixteen menus allow you to customize your embosser once for every task you need and call all the settings into action with a few keystrokes. Adjust your Thomas to make multiple strikes per character for extra- emphasized dots or to allow for heavier materials. Adjust for 6 or 8-dot Braille, use a variety of paper sizes, and reprint up to 99 copies of one document automatically with Multi-Copy. Available options for Thomas include ET Speaks, our fast and flexible speech system, and our Single Sheet Tractor Option. Single Sheet Tractor Option enables you to feed in single sheets of letterhead or card stock, one at a time by hand, so you can place Braille easily on materials without the customary tractor holes of Braille paper. ET Speaks comes up talking automatically and makes using your embosser far easier, because it echoes commands you enter on the keypad and "reads" all the embosser's status messages out loud. You can also use ET Speaks as the voice of your DoubleTalk-LT compatible screenreader and play a wide variety of realistic WAV-format sound files from both DOS and Windows. THOMAS TECHNICAL SPECIFICATIONS Printing Speed: 40 characters per second. Line Width: 40 characters with Library of Congress spacing. Paper Width: Adjustable. 1.5 to 15 inches (3.8 to 38.1 cm). Page Length: Selectable. 3 to 14 inches (7.6 to 35.6 cm). Paper: Continuous tractor feed paper. Paper Weight: Variable. Physical Description Width: 24.63 inches (62.6 cm). Depth: 11.5 inches (29.2 cm). Height: 8.63 inches (21.9 cm). Weight: 51 pounds (23.2 kg). Case Style: Desktop. Sound Level: 68 DBA, although sound level may vary with ambient conditions. Environmental Temperature: Operating: 35 F to 110 F (2 C to 43 C). Storage: Minus 55 F to 175 F (-48 C to 80 C). Humidity: Operating or Storage: 10% to 95% noncondensing. Shock: 3 foot drop (approximately 5G). Electrical Line Voltage: User Switchable. 105-125 VAC or 210-250 VAC. Amperage: 2.0 Amperes (105-125 VAC) or 1.0 Amperes (210-250 VAC). Wattage: 120 watts average (6.0 watts in low power mode). Interface: (Port 1) Centronics Compatible Parallel. (Port 2) Asynchronous Serial, EIA RS-232D, DTE. (Port 3--Optional) ET Speaks, Serial. After three minutes of inactivity, Thomas automatically enters a special low power consumption mode to save energy. As an ENERGY STAR(r) partner, Enabling Technologies has determined that this product meets the ENERGY STAR(r) guidelines for energy efficiency. Options ET Speaks. Single Sheet Tractor Option, which enables you to feed in single sheets of letterhead or card stock one at a time by hand. HOME, SCHOOL AND OFFICE EMBOSSERS: DOUBLE-SIDED JULIET CLASSIC * Basic value in interpoint Braille * Extra-wide Braille line (up to 56 characters) * Up to 55 characters per second Juliet Classic's top quality Braille on both sides of a page up to 56 characters wide has made her our all-time bestseller. The oversized embossing line makes full use of both sides of paper up to 15 inches wide. These paper-wise ways have made the desktop Juliet Classic a long-time favorite with businesses, agencies, schools, and Braille producers, large and small. Of course, you can also turn off the interpoint and make single-sided Braille whenever you want. Juliet Classic's standard features include regular Braille graphics, high resolution Braille graphics, and Dynamic Braille Scaling. With Dynamic Braille Scaling, you can turn on different Braille sizes, even within the same document. Built-in Braille sizes include Library of Congress Braille with or without increased line spacing, California sign Braille, Jumbo Braille, or the smaller Braille often preferred by our Japanese customers. Regular or high resolution Braille graphics make maps, simple line drawings, or math more accessible. Standard ports include one parallel port and a 9-pin serial port. An impact control on the rear panel allows you to select perfect Braille heights for different paper grades. Sixteen menus allow you to customize your embosser just once for every task you need and call all the settings into action with a few keystrokes. Adjust for 6 or 8-dot Braille, even print sideways. Use a variety of paper sizes. Reprint up to 99 copies of one document automatically with Multi-Copy. JULIET CLASSIC TECHNICAL SPECIFICATIONS Printing Speed: (Interpoint) Up to 55 characters per second. (Single-Sided) 40 characters per second. Line width: Up to 56 characters with Library of Congress spacing. Paper Width: Adjustable. 1.5 to 15 inches (3.8 to 38.1 cm). Page Length: Selectable. 3 to 14 inches (7.6 to 35.6 cm). Paper: Continuous tractor feed paper. Paper Weight: Variable. Physical Description Width: 24.63 inches (62.6 cm). Depth: 11.5 inches (29.2 cm). Height: 8.63 inches (21.9 cm). Weight: 51 pounds (23.2 kg). Case Style: Desktop. Sound Level: 68 DBA, although sound level may vary with ambient conditions. Environmental Temperature: Operating: 35 F to 120 F (2 C to 49 C). Storage: Minus 55 F to 175 F (-48 C to 80 C). Humidity: Operating or Storage: 10% to 95% noncondensing. Shock: 3 foot drop (approximately 5G). Electrical Line Voltage: User Switchable. 105-125 VAC or 210-250 VAC. Amperage: 2.0 Amperes (105-125 VAC) or 1.0 Amperes (210-250 VAC). Wattage: 120 watts average (6.0 watts in low power mode). Interface: (Port 1) Centronics Compatible Parallel. (Port 2) Asynchronous Serial, EIA RS-232D, DTE. After three minutes of inactivity, Juliet Classic automatically enters a special low power consumption mode to save energy. As an ENERGY STAR(r) partner, Enabling Technologies has determined that this product meets the ENERGY STAR(r) guidelines for energy efficiency. Options (For international customers) Single Sheet Tractor Option, which enables you to feed in single sheets of letterhead or card stock one at a time by hand. JULIET PRO * Feature-packed wide-line interpoint * Up to 56 character line * Up to 55 characters per second Juliet Pro has all of Juliet Classic's best features, because the extra-wide embossing line Brailles two sides at once. However, Juliet Pro also comes with our Single Sheet Tractors and ET Speaks, our innovative speech system, as standard equipment. These two additional features make your Juliet Pro adapt to an even larger range of applications. Single Sheet Tractors enable you to feed in single sheets of letterhead or card stock, one at a time by hand, so you can place Braille easily on materials without the customary tractor holes of Braille paper. ET Speaks comes up talking automatically and makes using your embosser far easier, because it echoes commands you enter on the keypad and "reads" all the embosser's status messages out loud. You can also use ET Speaks as the voice of your DoubleTalk-LT compatible screenreader and play a wide variety of realistic WAV-format sound files from both DOS and Windows. Like Juliet Classic, Juliet Pro's standard features include regular Braille graphics, high-resolution Braille graphics, and Dynamic Braille Scaling, which enables you to choose different Braille sizes. Select increased line spacing, California sign Braille, Jumbo Braille, or the smaller Braille often preferred by our Japanese customers. You can even mix Braille sizes within a document. Juliet Pro comes ready to work with your IBM-compatible PC's parallel port and has a 9-pin serial port, plus an additional serial port for connecting ET Speaks to your computer whenever you need it to read your screen or play audio files. An external speaker jack makes it easy for you to have ET Speaks broadcast sounds through standard speakers or talk to you alone through headphones. Juliet Pro's desktop case also has an impact control on the rear panel to allow you to select perfect Braille heights for different paper grades. Sixteen menus allow you to customize your embosser just once for every task you need and call all the settings into action with a few keystrokes. Adjust for 6 or 8-dot Braille, even print sideways. Use a variety of paper sizes. Reprint up to 99 copies of one document automatically with Multi-Copy. JULIET PRO TECHNICAL SPECIFICATIONS Printing Speed: (Interpoint) Up to 55 characters per second. (Single-Sided) Up to 40 characters per second. Line width: 56 characters with Library of Congress spacing. Paper: Continuous tractor feed paper or single sheets, hand-fed one at a time. Paper Width: Adjustable. 1.5 to 15 inches (3.8 to 38.1 cm). Page Length: Selectable. 3 to 14 inches (7.6 to 35.6 cm). Paper Weight: Variable. Physical Description Width: 24.63 inches (62.6 cm). Depth: 11.5 inches (29.2 cm). Height: 8.63 inches (21.9 cm). Weight: 51 pounds (23.2 kg). Case Style: Desktop. Sound Level: 68 DBA. Sound level may vary with ambient conditions. Environmental Temperature: Operating: 35 F to 120 F (2 C to 49 C). Storage: Minus 55 F to 175 F (-48 C to 80 C). Humidity: Operating or Storage: 10% to 95% noncondensing. Shock: 3 foot drop (approximately 5G). Electrical Line Voltage: User Switchable. 105-125 VAC or 210-250 VAC. Amperage: 2.0 Amperes (105-125 VAC). 1.0 Amperes (210-250 VAC). Wattage: 120 watts average (6.3 watts in low power mode). Interface: (Port 1) Centronics Compatible Parallel. (Port 2) Asynchronous Serial, EIA RS-232D, DTE. (Port 3) ET Speaks, serial. After three minutes of inactivity, Juliet Pro automatically enters a special low power consumption mode to save energy. As an ENERGY STAR(r) partner, Enabling Technologies has determined that this product meets the ENERGY STAR(r) guidelines for energy efficiency. ET * Basic value in speedier interpoint Braille * 40 character (standard Braille) line * 60 characters per second Producing top-quality Braille with a bit more speed than Juliet Classic or Juliet Pro, ET's shorter 40-character line makes full use of standard-width Braille paper. ET is a speedy and economical choice to get professional-looking, space-saving interpoint. ET's standard features include regular Braille graphics, high-resolution graphics and Dynamic Braille Scaling, which enables you to choose different Braille sizes. You can select increased line spacing, California sign Braille, Jumbo Braille, or the smaller Braille often preferred by our Japanese customers and even mix sizes within a document. ET's desktop case also has an impact control on the rear panel to allow you to select perfect Braille heights for different paper grades. Standard ports include one parallel port and a 9-pin serial port. Sixteen menus allow you to customize your embosser just once for every task you need and call all the settings into action with a few keystrokes. Adjust for 6 or 8-dot Braille, even print sideways. Use a variety of paper sizes. Reprint up to 99 copies of one document automatically with Multi-Copy. ET TECHNICAL SPECIFICATIONS Printing Speed: (Interpoint) 60 characters per second. (Single-Sided) 40 characters per second. Line width: 40 characters with Library of Congress spacing. Paper Width: Adjustable. 1.5 to 15 inches (3.8 to 38.1 cm). Page Length: Selectable. 3 to 14 inches (7.6 to 35.6 cm). Paper: Continuous tractor feed paper. Paper Weight: Variable. Physical Description Width: 24.63 inches (62.6 cm). Depth: 11.5 inches (29.2 cm). Height: 8.63 inches (21.9 cm). Weight: 51 pounds (23.2 kg). Case Style: Desktop. Sound Level: 68 DBA, although sound level may vary with ambient conditions. Environmental Temperature: Operating: 35 F to 120 F (2 C to 49 C). Storage: Minus 55 F to 175 F (-48 C to 80 C). Humidity: Operating or Storage: 10% to 95% noncondensing. Shock: 3 foot drop (approximately 5G). Electrical Line Voltage: User Switchable. 105-125 VAC or 210-250 VAC. Amperage: 2.0 Amperes (105-125 VAC) or 1.0 Amperes (210-250 VAC). Wattage: 120 watts average (5.8 watts in low power mode). Interface: (Port 1) Centronics Compatible Parallel. (Port 2) Asynchronous Serial, EIA RS-232D, DTE. After three minutes of inactivity, ET automatically enters a special low power consumption mode to save energy. As an ENERGY STAR(r) partner, Enabling Technologies has determined that this product meets the ENERGY STAR(r) guidelines for energy efficiency. Options (For international customers) Single Sheet Tractor Option, which enables you to feed in single sheets of letterhead or card stock one at a time by hand. JULIET PRO 60 * Feature-packed speedier interpoint * 40 character (standard Braille) line * 60 characters per second Juliet Pro 60 has ET's 40-character-wide embossing line and 60- character-per-second speed. It also includes two other standard features: Single Sheet Tractors and ET Speaks, our innovative speech system. These two additional standard features make your Juliet Pro 60 adapt to an even larger range of applications. Single Sheet Tractors enable you to feed in single sheets of letterhead or card stock, one at a time by hand, so you can place Braille easily on materials without the customary tractor holes of Braille paper. ET Speaks comes up talking automatically and makes using your embosser far easier, because it echoes commands you enter on the keypad and "reads" all the embosser's status messages out loud. You can also use ET Speaks as the voice of your DoubleTalk-LT compatible screenreader and play a wide variety of realistic WAV-format sound files from both DOS and Windows. Juliet Pro 60's standard features include regular Braille graphics, high-resolution Braille graphics, and Dynamic Braille Scaling, which enables you to choose different Braille sizes. You can select increased line spacing, California sign Braille, Jumbo Braille, or the smaller Braille often preferred by our Japanese customers. You can even mix Braille sizes within a document. Juliet Pro 60 comes ready to work with your IBM-compatible PC's parallel port and has a 9-pin serial port, plus an additional serial port for connecting ET Speaks to your computer whenever you need it to read your screen or play audio files. An external speaker jack makes it easy for you to broadcast from ET Speaks through standard speakers or headphones. Juliet Pro 60's desktop case also has an impact control on the rear panel to allow you to select perfect Braille heights for different paper grades. Sixteen menus allow you to customize your embosser just once for every task you need and call all the settings into action with a few keystrokes. Adjust for 6 or 8-dot Braille, even print sideways. Use a variety of paper sizes. Reprint up to 99 copies of one document automatically with Multi-Copy. JULIET PRO 60 TECHNICAL SPECIFICATIONS Printing Speed: (Interpoint) 60 characters per second. (Single-Sided) 40 characters per second. Line width: 40 characters with Library of Congress spacing. Paper: Continuous tractor feed paper or single sheets, hand-fed one at a time. Paper Width: Adjustable. 1.5 to 15 inches (3.8 to 38.1 cm). Page Length: Selectable. 3 to 14 inches (7.6 to 35.6 cm). Paper Weight: Variable. Physical Description Width: 24.63 inches (62.6 cm). Depth: 11.5 inches (29.2 cm). Height: 8.63 inches (21.9 cm). Weight: 51 pounds (23.2 kg). Case Style: Desktop. Sound Level: 68 DBA. Sound level may vary with ambient conditions. Environmental Temperature: Operating: 35 F to 120 F (2 C to 49 C). Storage: Minus 55 F to 175 F (-48 C to 80 C). Humidity: Operating or Storage: 10% to 95% noncondensing. Shock: 3 foot drop (approximately 5G). Electrical Line Voltage: User Switchable. 105-125 VAC or 210-250 VAC. Amperage: 2.0 Amperes (105-125 VAC). 1.0 Amperes (210-250 VAC). Wattage: 120 watts average (6.5 watts in low power mode). Interface: (Port 1) Centronics Compatible Parallel. (Port 2) Asynchronous Serial, EIA RS-232D, DTE. (Port 3) ET Speaks, serial. After three minutes of inactivity, Juliet Pro 60 automatically enters a special low power consumption mode to save energy. As an ENERGY STAR(r) partner, Enabling Technologies has determined that this product meets the ENERGY STAR(r) guidelines for energy efficiency. PRINT AND BRAILLE TOGETHER TRANSEND LT (Available in the United States only) Merriam-Webster's online dictionary says "transcend" means "to rise above or extend notably beyond ordinary limits." Our original TranSend has been helping Braille and print readers do just that for the last few years. Now TranSend LT makes it easier than ever to "connect the dots" by placing Braille and print together line by line on the same page. Braille and print together has long been the dream of parents of blind children, agencies serving blind clients, schools with blind students, Braille transcriptionists, and many others. Since we introduced our original TranSend several years ago, we've been amazed by the new and different projects people created with it-- many we'd never even thought of ourselves. However, we kept hearing something else, too: "Make it easier to set up and use!" We listened, and new TranSend LT has all the power--and more--of the original TranSend yet is as easy to use as an ATM machine. As ever, the entire TranSend system includes a sturdy Epson dot matrix printer and your choice of Romeo 25, Romeo Pro 50, Thomas, ET, Juliet Classic, Juliet Pro, Juliet Pro 60, BookMaker or Braille Express embossers. New, speedy LiteTalk speech keeps you on track as the voice and screen prompts lead you quickly and clearly through a few simple choices...and lets you change your mind at every step without starting all over. As few as five keystrokes will have you producing your choice of Braille, large or small print, or a combination of Braille and print. TranSend uses simple text files, easily created by virtually all popular word processing programs. How to Use TranSend LT Step 1: Prepare simple text files using your computer's word processor or your Braille notetaker. Step 2: Plug in your computer or Braille notetaker on TranSend LT's left side. Plug in the Epson printer and your Braille embosser on the right side. Step 3: Power everything up--TranSend LT last. Put paper in the printer or embosser. Step 4: Select the kind of document you want to make--Braille, print, or Braille and print in combination--from the TranSend's menu. Copy your file from your computer or Braille 'n Speak. Your document prints or Brailles. TranSend LT already "knows" (using its preset formats) how to produce documents that will fit perfectly on Braille paper. You just make a few one-key selections (as few as five) and your document starts printing. If you make a mistake, it's easy to back up one step and correct it without starting the whole job over. Print/Braille combination documents print first and Braille second--you just move the paper when TranSend LT prompts you. That's all it takes to create one-of-a-kind menus, memos, reports, syllabi, lessons, children's books, recipes, price lists, and other useful documents for ALL the readers you serve. TRANSEND LT TECHNICAL SPECIFICATIONS Physical Description (TranSend Control Unit Only): Width: 9.5 inches (24.1 cm). Length: 12.0 inches (30.4 cm). Height: 3.0 inches (7.6 cm). Weight: 9.5 pounds (4.3 kg). Case Style: Desktop. Controls: Main Power Switch. Configuration Keypad. Audio Level Control. Environmental: Temperature: Operating: 35 F to 120 F (2 C to 49 C). Storage: Minus 4 F to 175 F (-20 C to 80 C). Humidity: Operating or Storage: 10% to 95% noncondensing. Compatibility: Translator: American English only. Braille Embosser: Romeo 25, Romeo Pro 50,Thomas, ET, all Juliets, BookMaker, Braille Express 100, or Braille Express 150. Ink Printer(s): Epson dot matrix. Electrical: Input Voltage: 12 to 15 Volts AC or 16 to 18 Volts DC. Input Current: 750 Milliamperes average. Wattage: 15 Watts maximum. Interfaces: (Input Port 1) Centronics Compatible Parallel. (Input Port 2) Asynchronous Serial, EIA RS-232D. (Output Port 1) Centronics Compatible Parallel. (Output Port 2) Centronics Compatible Parallel. (Output Port 3) Speech, 9-pin serial. (External Speaker Jack) 8 Ohm, 0.1 Watt maximum. Includes standard USA power adapter and parallel interface cable and serial interface cable. Warranty: Our one-year warranty applies to the embosser and control unit. The ink printer has a two-year limited factory warranty from Epson. COMMERCIAL BRAILLE PRODUCTION BOOKMAKER, BRAILLE EXPRESS 100 and BRAILLE EXPRESS 150 * Large interpoint capacity for maximum productivity * 44 character (slightly wider than standard Braille) line * Speeds from 80 characters per second up to 150 characters per second All BookMaker and Braille Express embossers are interpoint production workhorses. Built in a rugged, transportable case, they all Braille on both sides of the page and have a huge 500- page memory for your largest jobs. Braille BookMaker embosses at 80 characters per second, while Braille Express 100 and Braille Express 150 emboss even faster--at 100 and 150 characters per second respectively. How much is that over time? We estimate that a BookMaker, used for five hours a day, can produce a quarter-million pages in a year, while a Braille Express 150 will make about a half-million pages in the same amount of time. No wonder these embossers are a standard in professional Braille production facilities large and small. Our three big embossers also come with ET Speaks, our new built-in speech, as standard equipment. That means they come up talking when you turn them on, so they're easier to use, yet the speech is so responsive it never slows you down. You can also use ET Speaks as the voice of your DoubleTalk-LT compatible screen reader and play a wide variety of realistic WAV-format sound files from both DOS and Windows. Listen in privacy with headphones or broadcast to a large room with external speakers. The BookMaker and both Braille Express machines can produce regular and high resolution graphics and combine them with text in the same document. You can also enlarge the space between lines of Braille to one and one-half times the normal amount and shift back to standard spacing in the same document. All BookMaker and Braille Express embossers arrive ready to work with your IBM-compatible PC's parallel port, use a variety of paper sizes and have sixteen menus to customize your embosser just once for every task you need. They also have a 25-pin serial port, as well as an impact control selector to adjust the Braille for different weights of paper. An additional serial port is dedicated to connecting ET Speaks to your computer whenever you need it to read your screen or play audio files, and an external speaker jack plugs into standard headphones or speakers. BOOKMAKER AND BRAILLE EXPRESS TECHNICAL SPECIFICATIONS Printing Speed: Braille BookMaker (Interpoint) 80 characters per second. (Single Sided) 50 characters per second. Braille Express 100 (Interpoint) 100 characters per second. (Single Sided) 60 characters per second. Braille Express 150 (Interpoint) 150 characters per second. (Single Sided) 90 characters per second. Line Width: 44 characters. Paper: Continuous tractor feed paper. Paper Width: Adjustable. 1.5 to 13.25 inches (3.8 to 33.7 cm). Page Length: Selectable. 3 to 14 inches (7.6 to 35.6 cm). Paper Weight: Variable. Physical Description Width: 21.25 inches(53.9 cm). Depth: 18.00 inches (45.7 cm). Height: 8.75 inches (22.2 cm). Weight: 50 pounds (22.7 kg). Case Style: Attaché, with handle. Sound Level: 80 DBA. Sound level may vary with ambient conditions. Environmental Temperature: Operating: 35 F to 120 F (2 C to 49 C). Storage: Minus 55 F to 175 F (-48 C to 80 C). Humidity: Operating or Storage: 10% to 95% noncondensing. Shock: 3 foot drop (approximately 5G). Electrical Line Voltage: User Switchable. 105-130 VAC or 210-260 VAC. Amperage: 1.0 Amperes (105-130 VAC). 0.5 Amperes (210-260 VAC). Wattage: 200 (approximate). Interface: (Port 1) Centronics Compatible Parallel. (Port 2) Asynchronous Serial, EIA RS-232D, DTE. (Port 3) Serial, ET Speaks. PLATE EMBOSSING DEVICE MODEL PED-30 * Makes durable zinc plates for long runs of press Braille * Used by commercial Braille publishing houses worldwide Before we developed the PED-30 around 1980, the world's Braille printing houses were unable to harness the power of computers. Plates for Braille presses were produced literally by hand, as operators carefully manipulated keyboards which were connected directly to a plate embosser. One error, and the whole plate had to be redone. The PED-30 revolutionized volume Braille production by making it possible to make zinc master plates from computers. Plates from the PED-30 go onto a specially modified commercial printing press, which stamps the dots into the paper to make the desired number of copies. To withstand this tremendous pressure, the zinc dot impressions are themselves created by the force of a precision ten-ton press. Thanks to PED-30, some printing houses today are producing plates for up to 2,000 finished pages of text a week per PED. Each plate can typically survive up to 5,000 separate impressions in a well-maintained press. Of course, if the pages happen to be for a magazine with 10,000 Braille subscribers, then millions of pages might be pressed before those masters are retired. These quantities are no exaggeration, because every sheet of Braille produced for the Library of Congress' huge stock of Braille books and periodicals is plated on a PED-30. The PED-30 is a proud component in the evolution of Braille production, still very much in progress. PED-30 TECHNICAL SPECIFICATIONS Weight: 1,525 pounds (692.4 kg). Shipping Weight: 1,750 pounds (794.5 kg). Cells Per Line: 40 maximum. Lines Per Side: 30 maximum. Embossing Speed: 40 characters per second. Cell Size: Each cell is made up of a 2 by 3 matrix with the following dot spacing: (Horizontal) Dot 1 to Dot 4 -- 0.093 inches (2.36 mm). (Vertical) Dot 1 to Dot 2 -- 0.092 inches (2.35 mm). Cell Spacing: (Horizontal) Dot 1 to Dot 1 -- 0.245 inches (6.22 mm). (Vertical) Dot 1 to Dot 1 -- 0.400 (10.17 mm). Interface: Asynchronous Serial. EIA RS-232D, DTE. Options: European standards (cell size and cell spacing). MARATHON * Transportable yet ultra-fast single-sided capacity * 42 character (slightly wider than standard Braille) line * 200 characters per second Ideal for proofreading books in production and other high-speed draft applications, Marathon produces an entire single-sided page of crisp, perfect Braille every five seconds-that's 200 characters per second, the highest Braille production capacity anywhere in the world at the price. Yet Marathon weighs just 75 pounds and fits neatly in its built-in aluminum case, so it can be transported safely. Marathon comes ready to work with your IBM-compatible PC's parallel port and has a 25-pin serial port as well. Sixteen menus allow you to customize your embosser once for every task you need and call all the settings into action with a few keystrokes. Adjust for 6 or 8-dot Braille, use a variety of paper sizes, and reprint up to 99 copies of one document automatically with Multi-Copy. MARATHON TECHNICAL SPECIFICATIONS Printing: Speed: 200 characters per second. Line width: 42 characters. Paper width: Adjustable. 1.5 inches to 13.25 inches (3.8 to 33.7 cm). Page length: Selectable. 3 inch to 14 inch (7.6 to 35.6 cm). Paper: Continuous tractor feed paper. Physical Description: Width: 21 inches (53.3 cm). Depth: 18 inches (45.7 cm). Height: 6.0 inches (15.2 cm), with case cover approximately 2 inches (5.0 cm) taller. Weight: 75 pounds (34.1 kg). Case Style: Attaché, with handle. Sound Level: 81 DBA, although sound level may vary with ambient conditions. Environmental: Temperature: Operating: 35 F to 110 F (2 C to 43 C). Storage: Minus 55 F to 175 F (-48 C to 80 C). Humidity: Operating or Storage: 10% to 95% (relative noncondensing). Shock: 3 foot drop (approximately 5G). Electrical: Line voltage: User Switchable. 105 to 130 VAC or 210 to 260 VAC. Amperage: 1.9 Amperes (105 to 130 VAC) or 0.95 Amperes (210 to 260 VAC) Watts: Approximately 220. Interface: (Port 1) Centronics compatible parallel. (Port 2) Serial, EIA RS-232D, DTE. BRAILLEPLACE More Braille is great for Braille readers, but Braille publishers are finding themselves frequently flooded with larger orders than their present equipment can comfortably handle. BraillePlace, our new interpoint embosser with speeds of nearly 300 characters per second and a 45-character line, is serious productivity for serious Braille publishing. BraillePlace connects to any computer through its parallel or serial ports, uses the same keypad controls as all our other embossers, and includes ET Speaks to vocalize controls and do other audio tasks. BraillePlace is large--39 inches wide by 30 inches deep by 58 inches high (99.1 cm by 76.2 cm by 149.9 cm)--and it requires a 220 volt electric line. We also ask that BraillePlace customers send a mechanically inclined trusted staff member to our plant for some brief training on how to keep BraillePlace at peak productivity. If you're a growing Braille publisher, our new BraillePlace might just be a perfect fit for you in the 21st century. BraillePlace Technical Specifications Paper: Continuous tractor feed paper. Characters Per Line: 45 maximum. Lines Per Side: 27 maximum. Embossing Speed: 300 characters per second. Braille Sizes: Dynamic Braille Scaling (includes Library of Congress standard Braille, Jumbo Braille, California Sign Braille, Petite Braille and Petite Braille with interlining) as well as Moon Type for the United Kingdom. Line Voltage: 220V AC. Ports: (Port 1) Centronics Compatible Parallel. (Port 2) Asynchronous Serial EIA RS-232D, DTE. (Port 3) ET Speaks, serial. Specifications may be subject to change. LABELERS & SIGNMAKERS KGS BRAILLE LABELER (Available from us in North, Central and South America) Despite technology's incredible advances in recent years, a simple way for people who are not Braille readers to make professional-looking Braille labels just hasn't existed. Until now, that is. When we saw the Braille Labeler from KGS Corporation, we knew we'd found the answer. Hotels, hospitals, agencies, schools, libraries, museums, and companies making products for people who are blind will find a dozen daily uses for the KGS Braille Labeler. The 4-pound Braille Labeler makes transparent single-line labels on strips that are 7, 15 or 25 Braille characters. In minutes, people without Braille skills can label almost anything in grade 1 or 2 Braille. Choose letters, numbers, and punctuation marks from a small visual screen to build the label, then insert one of three sizes of pre- cut labels and tell the Braille Labeler to emboss the label in durable, top quality Braille. KGS Braille Labeler Technical Specifications Physical Description: Dimensions: 9.5 inches deep by 6.75 inches wide by 2.5 inches high (24.13 cm by 17.15cm by 6.35 cm). Weight: 4 pounds (1.82 kg). Electrical: 120V AC. Warranty: One year. PRESTOBRAILLE PrestoBraille, our industrial-strength signmaker powered by compressed air, stamps Braille in the shortest form possible (often only one word, in fact) through thick materials with perfect consistency for thousands of impressions. With Duxbury software (sold separately) on a nearby PC, translate your message into correct grade 2 Braille. Then replicate the Braille in PrestoBraille's template with our special embossing pins. Your message can be up to 30 characters long in the standard Library of Congress template and up to 24 characters long in the optional California ADA template. Press a single button, and PrestoBraille stamps crisp, perfect Braille with a full ton of pressure, time after time. PRESTOBRAILLE TECHNICAL SPECIFICATIONS Physical Dimensions Overall Size: Width: 38.6 inches (98.0 cm). Height: 13.9 inches (35.3 cm). Depth: 24.0 inches (60.9 cm). Working Surface Area: Width: 35.8 inches (90.9 cm). Depth: 24.0 inches (60.9 cm). Weight: 150 pounds (68.0 kg). Controls and Ports Input Port: 1/4" NPT compressed air female connector on rear panel. Requires filtered, nonlubricated, dry, compressed air. Minimum air pressure 80 pounds per square inch. Maximum air pressure 150 pounds per square inch. Embossing Section Specifications Library of Congress (Standard Pin Carrier): Dot to Dot Spacing: 0.090 inches (2.286 mm). Cell to Cell Spacing: 0.240 inches (6.096 mm). Cells per Line: 30 Braille cells maximum. California ADA (Optional Pin Carrier): Dot to Dot Spacing: 0.100 inches (2.540 mm). Cell to Cell Spacing: 0.300 inches (7.620 mm). Cells per Line: 24 Braille cells maximum. Environmental Operating Temperature: 0 to 135 F (-17.7 C to 57.2 C). When the operating temperature is below 35 F (1.7 degrees C) the air supply must be dry enough to avoid ice formation in the regulator. BRAILLE TRANSLATION SOFTWARE DBT FROM DUXBURY SYSTEMS DBT is acclaimed worldwide for both ease of use and unmatched sophistication. Import files from Microsoft Word, WordPerfect, SGML, ICADD, HTML, plain text, or Braille text. Translate, then see the Braille on-screen exactly as it will look when embossed! Check the bright yellow "translated line" to see the print equivalents simultaneously on screen. Edit with QWERTY or six-key entry. Ten major languages are only a mouse-click (or a few keystrokes) away! Many other languages are available, too. Spellcheck your document, add styles, and preview the entire document for perfect results. DBT comes in versions for Windows and Mac. Both platforms share near-identical commands (files, too!) and are fully networkable. Dual licenses available for DBT Windows with Megadots BRAILLE BOARD FOR MICROSOFT WINDOWS Create ADA-compliant signs and other short messages in grade 1 or 2 English Braille within Windows 3.X, 95 or NT. Create Braille layouts in a wide range of Windows applications. Includes Braille TrueType scalable font. Requires a PC with 386 or higher processor, 4MB RAM, 1MB available hard drive space, and Microsoft Windows version 3.1, 95, 98 or NT. BRAILLE GRAPHICS/TACTILE GRAPHICS from REPRO-TRONICS TACTILE GRAPHICS DESIGNER SOFTWARE (Available from us in the United States and some other areas) With TGD, great Braille graphics are within reach right on your familiar Windows desktop. Draw a picture (or import graphics files from another drawing program or the Internet). Then emboss the graphic on your Romeo 25, Romeo Pro 50, Thomas, ET, Juliet, BookMaker or Braille Express Braille printer, make a raised line drawing, or move your graphic to illustrate a longer Braille text document in the Duxbury Braille Translator. TGD and RTI Tag/pad currently are not compatible with Windows XP, but an XP version is in development. To make all this possible, TGD has different sets of graphics tools, which you can mix and match according to your needs. Call for details or see the latest at www.tactile-audio.com! FLEXI-PAPER (Available from us in the United States and some other areas) Rugged Flexi-Paper works with special tools to create outstandingly clear and detailed raised line drawings. Completed Flexi-Paper tactile drawings won't crease or distort (even when crumpled) so documents stay perfectly legible even with heavy use. Use with the Tactile Image Enhancer or Thermo-Pen to create a nearly unlimited range of tactile graphics on Flexi-Paper. TACTILE IMAGE ENHANCER (Available from us in the United States and some other areas) Makes graphics with easy-to-read solid lines. First, create a dark, defined image directly on a sheet of Flexi-Paper. Draw or copy directly with an office photocopier, soft artist's pencil, or a china marker. Then just pass the image through the Tactile Image Enhancer to raise the lines. Works great with TGD software, too--just print your new computer image directly onto Flexi-Paper with an ink jet printer. (Hewlett-Packard ink jets work best--and let the ink dry thoroughly!) and raise it with the Tactile Image Enhancer. TACTILE IMAGE ENHANCER TECHNICAL SPECIFICATIONS Size: 8 inches high, 5 inches deep, and 20 inches wide (20.4 cm X 12.7 cm x 50.8 cm). Weight: 18 lb. (8 Kg). Power: 120 volt 10 amp 60 Hz (230 volt 5 amp 50 Hz). Color: Beige. TIE JUNIOR (Available from us in the United States and some other areas) TIE Junior produces the same great quality tactile documents as the larger Tactile Image Enhancer, but is smaller, lighter, more portable--and about one-third the price! Unique design uses 8.5 by 11-inch paper and eliminates the need for feed and exit trays. TIE Junior is 4-3/4 inches high by 5-3/4 inches deep by 14-3/4 inches wide (12.1 cm x 14.1 cm x 37.5 cm), weighs 3 pounds (1.4 Kg), and uses 120 volt 5 amp (or 230 volt, 2-1/2 amp) power. THERMO-PEN I & II (Available from us in the United States and some other areas) Thermo-Pen is a writing instrument designed to "write" a raised image directly on Flexi-Paper. Thermo-Pen II plugs in, then hold the pen vertically and draw your image directly (go slowly with light pressure!) onto a sheet of Flexi-Paper. Therm-Pen I works the same way, but is battery-powered. OTHER PRODUCTS FOR MORE BRAILLE POWER HANDSTAND Putting Braille on a pedestal is easy with new HandStand, the ultimate portable workspace. Adjustable HandStand weighs only about 2 pounds (a little less than a kilogram), fits in your briefcase, purse, or computer case and is instantly available for computing, Braille reading, or notetaking. Folded, HandStand is scarcely bigger than a white cane or a small umbrella. Aluminum HandStand assembles in seconds without tools and securely holds even a loaded laptop, yet disassembles instantly to fit inside even the most jammed carry-on suitcase. While HandStand isn't strong enough to support your embosser or a full box of paper, it keeps many other useful items within easy reach--finished documents or Braille or print manuals--as well your laptop computer or notetaker. HandStand's work surface sits atop adjustable tripod legs and is 12 inches (30.5 cm) wide by 9.5 inches (24.1 cm) deep yet only one-sixteenth of an inch (1.59 mm) thick. The surface tilts toward you at the touch of a button and locks in position till you change it. The height is adjustable, too. A nonskid finish on the work surface ensures your equipment or pages won't slide off. HandStand comes in two models. Tall HandStand is high enough to serve as a portable podium, comfortable to use while giving a speech or teaching a class, then drop the height with one easy adjustment to a 24-inch (60.9 cm) height ideal for reading a Braille book while seated. Regular HandStand adjusts to several comfortable seated working heights, to a maximum of 31 inches (78.7 cm). An optional add-on shelf, also 12 inches by 9.5 inches (30.5 by 24.1 cm), is available, too. Tall HandStand: Folded size: 18.5 by 2-1/8 inches (46.9 cm by 5.4 cm). Unfolded size: 24 inches up to 42 inches (60.9 cm to 106.7 cm) . Weight: 2.5 pounds (1.13 kg). Regular HandStand: Folded size: 12.5 by 2-1/8 inches (31.75 cm by 5.4 cm). Unfolded size: 14 inches up to 31 inches (35.5 cm to 78.7 cm). Weight: 2 pounds (.9 kg) BRAILLE PAPER 11.5-inch by 11-inch or 8.5-inch by 11-inch sheets, tractor edges, also available with GBC pre-punching. SOUND ENCLOSURES Soften printer noise for a more comfortable working environment. Several types and sizes available. Contact us for current information. PRICES AND ORDERING INFORMATION Product, Product Number, Price Romeo 25 70RB0025 $2,195 Romeo Pro 50 (includes ET Speaks and Single Sheet Tractors) 70RB0050 $2,895 Thomas 70TB0000 $3,295 Thomas with Single Sheet Tractor Option 70TB0OPT $3,495 Thomas with ET Speaks Option 70TB000T $3,395 Thomas with ET Speaks & Single Sheet Tractor Options 70TBOPTT $3,595 Juliet Classic 70JB0000 $3,795 Juliet Classic with Single Sheet Tractor Option (Available outside the US only) $3,995 Juliet Pro (includes ET Speaks & Single Sheet Tractors) 70JBDLXW $4,095 ET 70ET0000 $3,795 ET with Single Sheet Tractor Option (Available outside the US only) $3,995 Juliet Pro 60 (includes ET Speaks & Single Sheet Tractors) 70JBDLXN $4,095 Single Sheet Tractors enable you to feed one sheet of non-tractor paper or plastic at a time manually through the embosser and allows 22 lines per page maximum. Please order all extra features you feel you might need at the time your embosser is manufactured, as Single Sheet Tractors and ET Speaks are prohibitively difficult and expensive to retrofit on existing embossers. TranSend LT Control Unit 70TS0000 $1,395 TranSend LT Control Unit & Epson Printer $1,895 Full TranSend LT systems below are a better buy because they cost $90.00 LESS than components purchased individually. TranSend LT, Romeo 25 & Epson Printer $4,000 TranSend LT, Romeo Pro 50 & Epson Printer $4,700 TranSend LT, Thomas & Epson Printer $5,100 TranSend LT, Juliet Classic & Epson Printer $5,600 TranSend LT, Juliet Pro & Epson Printer $5,900 TranSend LT, ET & Epson Printer $5,600 TranSend LT, Juliet Pro 60 & Epson Printer $5,900 TranSend LT, BookMaker & Epson Printer $10,800 TranSend LT, Braille Express 100 & Epson Printer $12,800 TranSend LT, Braille Express 150 & Epson Printer $17,800 BookMaker 70BM8TO1 $8,995 Braille Express 100 70BET100 $10,995 Braille Express 150 70BET150 $15,995 Marathon 70MA1000 $14,995 PED-30 70PD0030 $92,000 BraillePlace 70BR0000 $36,995 PrestoBraille Signmaker 70PB0001 $3,295 KGS Braille Labeler $995 Labels for KGS Braille Labeler (250 per box) Label A (25 Braille characters, quantity 250) $45 Label B (15 Braille characters, quantity 250) $40 Label C ( 7 Braille characters, quantity 250) $35 Duxbury Braille Translator for Windows 70SF0030 $595 Duxbury Braille Translator for DOS 70SF0001 $550 Dual DBT (Megadots/DBT Win) 70SF0032 $850 Duxbury for Macintosh 70SF0003 $645 Duxbury Braille Board for Windows 70SF0007 $595 Upgrades from earlier Duxbury and Megadots products always available--CALL! TGD Software--Choose the graphics solution to fit your needs! (TGD and RTI Tag/pad not currently compatible with Windows XP, but an XP version is in development.) TGD Pro 70RTOPRO $499.95 For sighted people producing Braille graphics. Includes RTI TAG/Pad RTI TAG/Pad alone 70RTOPAD $195 Tactile Image Enhancer 70RTOTIE $995 TIE Junior 70RTJTIE $395 Thermo-Pen I 70RTBPEN $110 Thermo-Pen II 70RTOPEN $125 Total Graphic Solution 70RTOTGS $1,595 Includes TGD software, Tactile Image Enhancer, RTI TAG/pad, 100 sheets of Flexi-Paper (50 sheets for Tactile Image Enhancer and 50 sheets for Thermo-Pen), and Thermo-Pen II. Total Graphics Solution Junior $995 Includes TGS software, Tactile Image Enhancer Junior, RTI TAG/pad, 100 sheets of Flexi-Paper (50 sheets for TIE Junior and 50 sheets for Thermo-Pen) and Thermo-Pen I. Flexi-Paper 70RT8511 (Available in one or more lots of 100 sheets only. Prices are per sheet. Please specify paper type: FP-TP for the Thermo-Pen or FP-TIE for the Tactile Image Enhancer). Sizes 5.5 by 8.5 8.5 by 11 11.5 by 11 11 by 17 A4 A3 70RT5585 70RT8511 70RT1115 70RT1117 100 sheets .40 .75 1.15 1.50 .75 1.50 200 sheets .38 .70 1.05 1.40 .70 1.40 500 sheets .35 .65 .98 1.30 .65 1.30 1000 sheets .32 .60 .90 1.20 .60 1.20 HandStand (Tall) 7000CR3 $109.95 HandStand (Regular) 7000CR1 $89.95 HandStand Extra Shelf 7000TRAY $75.00 DoubleTalk PC 70SF0303 $299 DoubleTalk LT 70SF3011 $320 ZoomText Xtra Level 1 7014ZOOM $395 ZoomText Xtra Level 2 7016ZOOM $595 Margin Stripper 70MS000 $24.95 Braille Paper 11.5" by 11" (1,000 sheets, tractor) 30001201 $35 Braille Paper 8.5" by 11" (1,500 sheets, tractor) 30001203 $40 Braille paper in other sizes & formats available CALL Viking Sound Enclosure 70VK000F $700 Full size--has extra storage space in base Viking Sound Enclosure Top only--quiets embosser on your desktop or printer stand 70VKFTOP $395 Full Print or Braille Manuals for ETC Embossers $25 Customized Computer System from ETC CALL Prices may be subject to change without notice. FL residents only: Remember to add State Sales Tax to your order. Next, add shipping charges for your order. (Alaska, Hawaii and overseas destinations may involve additional shipping--please call!) Shipping Charges: Romeo 25, Romeo Pro 50 $60 Thomas, Marathon, ET, all Juliets, BookMaker $110 Braille Express $150 TranSend LT--Control Unit Only $25 TranSend LT--Control Unit & Epson Printer $60 BraillePlace & PrestoBraille CALL ALL SOFTWARE (except TGD) $10 ALL REPRO-TRONICS Products, including TGD: Freight and handling costs within the US depend upon invoice amount: Up to $200, 10% of invoice, $201-$750, 7% of invoice, above $751, 5% of invoice. DoubleTalk (all) $10 HandStand (all) $10 ETC Manuals, Print or Braille $5 Margin Stripper $7 Braille Paper Free Matter or $8 for rush orders Full-size Viking Sound Enclosure CALL Top-only Viking Sound Enclosure CALL Add the shipping total to your ORDER TOTAL for the TOTAL AMOUNT DUE. We accept cash, checks payable to Enabling Technologies or the following major credit cards: VISA, MasterCard, Discover and American Express. With credit card orders, we'll need your account number as well as the expiration date on the card and your signature. We'll also bill (net 30) if you have a credit-approved account or represent a firm, school or government agency with a satisfactory rating from D&B. Please include your purchase order number if applicable. No COD's. We'll need to know the following to ship your order: Your name, your company or institution (if any), street address, city, state, zip code, and your daytime phone number and/or e-mail address (in case we have a question about your order.) FOR USA CUSTOMERS Call toll-free at 1 (800) 777 DOTS (3687), then press 2, to place an order, speak to a product manager, or get more catalogs in Braille, on disk or in large print. Fax us toll-free, too, at 1 (800) 950 DOTS, write us, or e-mail us at enabling@brailler.com. All embossers come with an automatic one-year warranty on parts and labor. For customers in the continental USA, we offer free telephone support on our toll-free number, 1 (800) 777 DOTS (3687). You can also find help for common problems and download free replacement print and Braille manuals from our speech- friendly Web site, www.brailler.com, at any hour of the day or night. After one year, service contracts are available so you can enjoy the security of continued factory service on your embosser. Service contract prices include parts, labor and return shipping to you for a period of one year. Romeo 25 $435 Romeo Pro 50 $455 Thomas, ET, Juliet Classic, Pro & Pro 60 $495 TranSend/TranSend LT $115 TranSend/TranSend LT with Romeo 25 $545 TranSend/TranSend LT with Thomas, ET, Juliet Classic, Pro & Pro 60 $600 BookMaker $765 Braille Express 100 & 150 $1,095 Marathon $1,375 PrestoBraille $325 We cannot guarantee that loaner embossers will always be available, because maintaining sufficient stock to insure this service would raise costs for everyone, including customers who may never need it. We often do provide loaner units when we have them available, however. FOR INTERNATIONAL CUSTOMERS All our embossers come with a one-year warranty on parts and labor, though customers are responsible for shipping charges to and from our factory. We have many authorized dealers and service centers throughout the world. There may be one near you. Free telephone support is available from 9:00 a.m. to 4:00 p.m. Eastern time at (772) 225 3687, and our fax machine at (772) 225 3299 is on 24 hours a day. You can also find help for common problems and download free replacement print and Braille manuals in English from our speech-friendly Web site, www.brailler.com, at any hour of the day or night. For additional literature, ordering information or further assistance, please contact us. Brand names, company names, or product names mentioned in this document may be trademarks, registered trademarks, or service marks of their respective companies. The ENERGY STAR(R) logo is a registered service mark of the United States Environmental Protection Agency. TOOLS FOR BRAILLE POWER, Volume 10 Enabling Technologies Company World's Leading Manufacturer of Braille Embossers 1601 Northeast Braille Place, Jensen Beach, Florida 34957 Phone: (772) 225 3687 Fax: (772) 225 3299 Toll-Free Phone (continental USA only) (800) 777 DOTS (3687) Toll-Free Fax (continental USA) (800) 950 DOTS (3687) On the Web at http: //www.brailler.com E-mail to enabling@brailler.com